In a message dated 1/20/2010 12:01:31 PM Central Standard Time,
jhassall@blacksburg.net writes:
> I'm looking for a source for 3/8" grade 8 U bolts (or bolt stock) for
> the TR4 solid axle. I've checked the usual suspects locally but no one
> carries bolt stock that small. Even utility trailer shops don't carry
> stock smaller than 1/2". Sheesh!
>
> tia
>
> jim
>
I am not sure grade 8 is required. Do you need them longer for lowering
blocks? You can go to 1/2" and have them custome made or they may have them
on the shelf. You drill the mounting plates O.S., of course. It's a little
tight, but I have done to two or three TRs when I was unable to find the
3/8th".</HTML>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.96
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|