The doing things solo part really sucks as we age. I used to sling those
trannies into place with hardly any pain, and mounting a bonnet was no
problem. Now I have to work up the courage. It helps to have a willing wife.
Try withholding sex to get her cooperation.
OK, promise to wash up before groping. Maybe that has a chance.
-----Original Message-----
From: fot-bounces+rkramer=rdoequipment.com@autox.team.net
[mailto:fot-bounces+rkramer=rdoequipment.com@autox.team.net] On Behalf Of
RACER BUD
Sent: Wednesday, May 07, 2008 4:33 PM
To: tr6racer21@earthlink.net; Henry Frye; Chuck Arnold
Cc: Friends of Triumph
Subject: Re: [Fot] Replacing TR6 hood
Hi gang...There's just something about being able to do things solo as we
age...Maybe it's about not depending on anyone for help, because 'It Aint
Always Available'...and the challenge is what this car stuff is greatly
about!
Racer Bud..Spitfire #21
----- Original Message -----
From: "U K MOTORSPORTS" <tr6racer21@earthlink.net>
To: "Henry Frye" <henry@henryfrye.com>; "Chuck Arnold" <triosan@gmail.com>
Cc: "Friends of Triumph" <fot@autox.team.net>
Sent: Wednesday, May 07, 2008 2:50 PM
Subject: Re: [Fot] Replacing TR6 hood
> Henry this is a great idea, and might work on a race car. However it will
> not work on a TR6. There is the inner fender that is in the way. My
> suggestion would be to remove the grill and fan shroud and access the
> brackets in that fashion. You may be able to get a long 3/8ths extension
> w/
> a 1/2 inch socket up from the bottom but from experience this may be more
> trouble than its worth...Chip
>
>
>> [Original Message]
>> From: Henry Frye <henry@henryfrye.com>
>> To: Chuck Arnold <triosan@gmail.com>
>> Cc: Friends of Triumph <fot@autox.team.net>
>> Date: 5/7/2008 4:16:41 PM
>> Subject: Re: [Fot] Replacing TR6 hood
>>
>> I am pretty sure a TR6 is quite similar to a TR4, so maybe this helps.
>> This is how I do it...
>>
>> Remove the headlights. Lay the hood in place on car. Reach in the
>> headlight holes to bolt up the brackets, a couple bolts per side. Open
>> hood, put the rest of the bolts in. Tighten them a little, but not so
>> much as the hood can't slide in the brackets. Close the hood, align as
>> needed, then tighten the bolts some more through the headlight holes so
>> it can't slide in the brackets. Open the hood, tighten the bolts to
>> proper torque. Reinstall headlights.
>>
>> > -----Original Message-----
>> > From: fot-bounces+henry=henryfrye.com@autox.team.net
>> > [mailto:fot-bounces+henry=henryfrye.com@autox.team.net] On
>> > Behalf Of Chuck Arnold
>> > Sent: May 07, 2008 1:16 PM
>> > To: Friends; Triumph
>> > Subject: [Fot] Replacing TR6 hood
>> >
>> > Looking to see what tricks people use to re-install the hood
>> > after engine replacement when done as a one person job. I
>> > have done it several times, probably try different techniques
>> > each time, and get frustrated with all of them.
>> >
>> > --
>> > Chuck Arnold
>> > _______________________________________________
>> > http://www.team.net/donate.html
>> >
>> > Fot mailing list
>> > Fot@autox.team.net
>> > http://autox.team.net/mailman/listinfo/fot
>> >
>> > You are subscribed as henry@henryfrye.com
>> _______________________________________________
>> http://www.team.net/donate.html
>>
>> Fot mailing list
>> Fot@autox.team.net
>> http://autox.team.net/mailman/listinfo/fot
>>
>> You are subscribed as tr6racer21@earthlink.net
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG.
>> Version: 7.5.524 / Virus Database: 269.23.9/1419 - Release Date: 5/7/2008
> 7:46 AM
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as budscars@comcast.net
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
You are subscribed as rkramer@rdoequipment.com
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|