hmmmm thought about that too but dropped that idea speedly after a short
test.
The troublesome thing is "going on throttle". With much grip on the pedal
surface the pedal don't slip smoothly along the shoe anymore which makes the
ride very rough and dangerous when accelerating out of a corner.
Cheers
Chris
At 12:01 PM 8/11/2007, jim hearn wrote:
>Has anybody successfully addressed those bare metal Triumph accelerators?
I
>was thinking of gluing on to the face of the accelerator some rubber or
>maybe some abrasive cloth. I thought I would see if anyone had come up
with
>a good match here. Jim in Sacramento
Not a Triumph accelerator, but my Formula Ford has a small piece
of the stuff they put on skateboard decks. Works well to give you
some grip. One piece costs about $25, as I recall, but will last you
a lifetime.
R. John Lye
rjl6n@cstone.net
_______________________________________________
http://www.team.net/donate.html
tony@tonydrews.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|