They make a non-skid tape that you can get that will serve this purpose
perfectly. Almost any boat store will have this stuff.
Never Be beaten by Equipment
Kas Kastner
----- Original Message -----
From: Gary
To: jim hearn ; fot@autox.team.net
Sent: Saturday, August 11, 2007 9:34 AM
Subject: Re: [Fot] Those bare metal Triumph accelerators
Jim:
Try a bit of the sailboat deck paint which produces a gritty, non-skid
surface. Might be able to find it at a hardware store or if not, certainly
at a marine supply.
Gary
----- Original Message -----
From: "jim hearn" <jimhearn1@comcast.net>
To: <fot@autox.team.net>
Sent: Saturday, August 11, 2007 9:01 AM
Subject: [Fot] Those bare metal Triumph accelerators
> Has anybody successfully addressed those bare metal Triumph accelerators?
> I
> was thinking of gluing on to the face of the accelerator some rubber or
> maybe some abrasive cloth. I thought I would see if anyone had come up
> with
> a good match here. Jim in Sacramento
>
> [demime 1.01d removed an attachment of type application/ms-tnef which had
> a name of winmail.dat]
> _______________________________________________
> http://www.team.net/donate.html
>
> vintage.racer@comcast.net
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
kaskas@cox.net
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|