Re: A cam vs. B cam and More!

[R Haug <haugchiro@moscow.com>]

STAN CHERNOFF wrote:

> Why stop with the "B" cam instead of the cam from Nissan called "Solex II"
> and sometimes referred to as the "C" cam.  This cam had more lift and
> duration than the "B" cam and had the same base circle diameter so the
> rocker geometry was correct.  The marking on the Solex II cam was marked
> "25510" and was supplied through the Datsun Comp department.  These were
> not regrinds.

Stan,
Are the C cams still available new or is it NLA.
Bob