Why stop with the "B" cam instead of the cam from Nissan called "Solex II"
and sometimes referred to as the "C" cam. This cam had more lift and
duration than the "B" cam and had the same base circle diameter so the
rocker geometry was correct. The marking on the Solex II cam was marked
"25510" and was supplied through the Datsun Comp department. These were
not regrinds.
Stan
SRL311-00037
=========
At 09:19 PM 2/3/01 -0800, Gerardo Magana wrote:
>Hey there, A few people asked how you tell the difference between an "A" and
>"B" cam. The answer is that they are stamped on the end, I took a picture of
>an "A" cam and posted it on my photopoint album, the link is below for those
>of you that are curious.
>Gerardo Magana
>67.5 Solex SRL 311-00222
>http://albums.photopoint.com/j/AlbumIndex?u=1487301&a=11209510
|