Re: dwell adjustment

["Thomas Walter" <ra0618@email.sps.mot.com>]

You don't!

Actually what you need to do it make sure the points are all the way
open on the highest point on the cam lobe. Then set the point gap
to 0.018" to 0.022".  I usually gap them around 0.018" as they will
open with wear.

Check your timing, and you're off!

Cheers,

Tom

Stephan Sochoux wrote:

> Hello,
>
> This is maybe an elementary question but how do you
> adjust the dwell without a dwell meter ?
>
> Thanks,
>
> Stephan
> '69 2000