That confuses it even more. The module I have is a Wells F102 but it has a blue
grommet and not a green one as John has said it needs, it had a 2 and a 4 wire
harness but the manual said the 3rd blue wire was not needed .Bottom line is it
didn't work so I took it back and they refunded my money. But I still would
like a replacement.Maybe wells makes a F102 with a green grommet?
Thanks for your imput and time in this matter.
Rick Hayes
vin#782
www.drive.to/ricksbrick
Maycinc@cs.com wrote:
> The correct module is a Wells F-102. I has a 2 wire and 4 wire plug.
> According to Terry Tanner, nobody makes a 3 wire module. My old harness had
> a 3 wire but it needed to be replaced so I got one from Terry. His harness
> has a 2 wire plug. According to the wiring diagram in my shop manual, the
> blue wire connects to a brown wire that goes to the starter solenoid. You
> might give Terry a call on this he might be able to tell you how to rewire
> your harness. If I remember right, someone said that the 3 wire harness with
> work with the 2 wire plug.
>
> Marvin
> #1343
>
> In a message dated 2/2/2001 9:34:02 PM Mountain Standard Time,
> rickandsue19@sympatico.ca writes:
>
> << ohn:
> I sure wish I had written before I purchased the module. I remember the
> salesperson was toying with the idea it was the same as the ford truck..Well
> I
> will check the gromett tomorrow and I'll let you know how I make out I sure
> do
> appreciate your answer live and learn I guess next time I use the group
> first!
>
> thanks again
> Rick Hayes >>
///
/// bricklin@autox.team.net mailing list
///
|