The correct module is a Wells F-102. I has a 2 wire and 4 wire plug.
According to Terry Tanner, nobody makes a 3 wire module. My old harness had
a 3 wire but it needed to be replaced so I got one from Terry. His harness
has a 2 wire plug. According to the wiring diagram in my shop manual, the
blue wire connects to a brown wire that goes to the starter solenoid. You
might give Terry a call on this he might be able to tell you how to rewire
your harness. If I remember right, someone said that the 3 wire harness with
work with the 2 wire plug.
Marvin
#1343
In a message dated 2/2/2001 9:34:02 PM Mountain Standard Time,
rickandsue19@sympatico.ca writes:
<< ohn:
I sure wish I had written before I purchased the module. I remember the
salesperson was toying with the idea it was the same as the ford truck..Well
I
will check the gromett tomorrow and I'll let you know how I make out I sure
do
appreciate your answer live and learn I guess next time I use the group
first!
thanks again
Rick Hayes >>
///
/// bricklin@autox.team.net mailing list
///
|