Now you have me thinking about the combination I used and it was the SV
pedestal and a SII fork and bearing. With the pressure plate and disc I
used it all may have been a matter of luck that I got it right after the
second try. I will take a good look at it the next time I have it apart.
Eric G. and I talked about a low key SOS but not at Dillard. Nothing
has been committed to as far as I know but if we want to put something
on we need to move on it here soon. Jim
Russ Eshelman wrote:
>Jim, I checked 6 transmissions that I had easy excess too. 2 non-synchro
>and 4 (one 25 spline, three 10 spline) all synchro trannys, 2 of which are
>still in the cars (series V). I found that the all-synchro's had the tall
>pedestal with small fork and small release bearing, while the
>non-synchro's had the short pedestal with the large fork and large release
>bearing. The change came about with the introduction of the all-synchro
>transmission B94100001 and the diaphragm type clutch, although you can mix
>and match, I would say it is the match up between the pedestal and pressure
>plate that makes the difference. The 25 spline trannys was introduced with
>B395017309 onward.
> Jim have you heard anything more about an SOS at Dillard in the Spring?
>Happy Beaming!
>Russ
>----- Original Message -----
>From: <ellis838@concentric.net>
>To: <alpines@autox.team.net>
>Sent: Tuesday, November 19, 2002 9:36 PM
>Subject: Re: Engine Transmission combos
>
>
>>Paul,
>> I am sure Russ is on top of this but thought I would let you and
>>anyone else who is mixing and matching know the combination I used. I
>>got it wrong the first time and had to take it all apart, not much fun.
>>Anyway I have a 1725 with a 10 spline all syncro trans a SII flywheel,
>>volvo disc and MGB plate, SV pivot block SII release arm and bearing.
>>The SV pivot block is the short one and the SII release arm is the big
>>bearing. unit. Jim
>>
>>CANISDOG@aol.com wrote:
>>
>>>Thanks for all the help. This will serve as a good reference. I'll get
>>>
>busy
>
>>>checking it out.
>>>
>>>Paul
>>>
>>>.
|