Most definately. The only problems that you will encounter is flywheel/
clutch/throwout bearing fork capabilities. If you use the fork that is in
the series 5 trans, you probably need the series 5 flywheel, clutch and
disc. If you want to retain the current flywheel and clutch be sure and use
the fork from the series 3 trans. These are different heights and
incompatable. also, the throwout bearing is different, but this is not
really a problem since it should be changed everytime the bell housing comes
out. Lou
----- Original Message -----
From: <RSWiser@aol.com>
To: <alpines@autox.team.net>
Sent: Monday, November 18, 2002 5:21 PM
Subject: Engine Transmission combos
> Will a Series V transmission bolt up to a Series III engine.
|