Bill, Was it just a brush replacement or did they clean everything up and
replace the main spring?
Also, just remembered another reason starters sometimes malfunction -
missing teeth on the ring gear! In this case the starter spins but is
unable to engage the ring gear. This was a notable problem with Morris
Marinas which seemed to have very thin ring gears made of the most brittle
alloy known to man. The starter gear would just knock them off after a
while.
Vic
----- Original Message -----
From: "Bill Blue" <dablue@worldnet.att.net>
To: "Vic Hughes" <v.hughes@austarmetro.com.au>; <robert.m.bailey@att.net>;
<alpines@autox.team.net>
Sent: Tuesday, June 04, 2002 7:24 AM
Subject: Re: Click....nothing....d**n
> What I don't inderstand is why the problem went away with a simple brush
> replacement. Nothing was changed, the old starter went back into use. We
> figured perhaps a brush was hanging up. Also, the problem Jan describes
> should result in a huge current draw. I had nothing.
> Bill
> ----- Original Message -----
> From: "Vic Hughes" <v.hughes@austarmetro.com.au>
> To: "Bill Blue" <dablue@worldnet.att.net>; <robert.m.bailey@att.net>;
> <alpines@autox.team.net>
> Sent: Monday, June 03, 2002 8:29 AM
> Subject: Re: Click....nothing....d**n
>
>
> > The problem was as described earlier by Jan Eyerman. Used to happen to
my
> > dads Morris Major and Morris 1100. Solved by putting the car in top
gear
> > and rocking it, or by whacking the starter with something solid (much
more
> > satisfying).
> >
> > As with most Lucas problems it generally happens at the least convenient
> > time.
> >
> > Vic
> > ----- Original Message -----
> > From: "Bill Blue" <dablue@worldnet.att.net>
> > To: <robert.m.bailey@att.net>; <alpines@autox.team.net>
> > Sent: Monday, June 03, 2002 11:33 PM
> > Subject: Re: Click....nothing....d**n
> >
> >
> > > Had this problem on a Series II 'way back when it was practically new.
> > The
> > > starting handle would fix the problem with a smart whack on the
starter.
> > > This continued for sometime until I had the starter rebuilt (read new
> > > brushes) and the problem went away. Never knew what the problem was.
|