alpines
[Top] [All Lists]

Re: Aluminum Sump QuestionsIMPORTANT

To: CANISDOG@aol.com
Subject: Re: Aluminum Sump QuestionsIMPORTANT
From: "" <davidkellogg@hotmail.com>
Date: Fri, 18 May 2001 15:57:34
Hello Again, Paul,

  Seems that there's a potential concern with the dipstick, unless you 
measured it against the stick which came in the GT's 1725 block.  Were they 
the same?  Also, is the mounting boss for the dipstick the same on both 
blocks?  A 'No' or an 'I'm not sure' could lead to confusion, but that can 
be remedied.

  If you know which dipstick is which, measure them and the receptacle on 
the GT block.  If you find/ found them to be the same as a Series Alpine 
block then, again, you should be ok. If not, just monitor your oil very 
carefully until you feel you can trust the dipstick you presently have as a 
'safe measure.'

  Again, please let me know if all's well.

  Cheers,

  David
_________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>