Al;
Could be. I guess I don't know what else would be in that kit. Of
course, Moss offers no
description for what's in the kit an, as I said before, SHOWS nothing
in their illustration.
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=32828
Dave
Alan Salvatore wrote:
>Moss lists it as a repair kit:
>#181-995
>
>Al
>
>----- Original Message -----
>From: "David Friedlander" <forzion@maine.rr.com>
>To: <MTRsix71@aol.com>
>Cc: <6pack@autox.team.net>
>Sent: Saturday, June 07, 2008 8:42 PM
>Subject: Re: [6pack] PDWA O-rings
>
>
>
>
>>Thanks, Michael. Very helpful. Interesting that none of the Big Three's
>>catalogs show ANY o-rings for the PDWA.
>>
>>Dave
>>
>>
>>
>>MTRsix71@aol.com wrote:
>>
>>
>>
>>>Dave,
>>>According to a chemical compatibility chart I have, Silicone Oil
>>>(DOT5) is has excellent compatibility with the following plastics:
>>>Polyethylene
>>>Polypropylene
>>>Polysulfone
>>>Polyurethane
>>>And also excellent compatibility with the following elastomer: FKM or
>>>more commonly known as Viton.
>>>
>>>I believe I used Danco brand #36 o-rings from Home Depot. These are
>>>either polyethylene or polypropylene.
>>>
>>>I have had DOT5 in my car for over three years and no leaks or
>>>problems. I had replaced all the hoses, seals, rear wheel cylinders,
>>>and brake master cylinder as well as the same time.
>>>
>>>Cheers!
>>>Michael
>>>
>>>
>>>
>>>------------------------------------------------------------------------
>>>
>>>
>_______________________________________________
>
>Support Team.Net http://www.team.net/donate.html
>
>6pack@autox.team.net
>http://autox.team.net/mailman/listinfo/6pack
>
>http://www.team.net/archive
>
>You are subscribed as forzion@maine.rr.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|