Moss lists it as a repair kit:
#181-995
Al
----- Original Message -----
From: "David Friedlander" <forzion@maine.rr.com>
To: <MTRsix71@aol.com>
Cc: <6pack@autox.team.net>
Sent: Saturday, June 07, 2008 8:42 PM
Subject: Re: [6pack] PDWA O-rings
> Thanks, Michael. Very helpful. Interesting that none of the Big Three's
> catalogs
> show ANY o-rings for the PDWA.
>
> Dave
>
>
>
> MTRsix71@aol.com wrote:
>
>> Dave,
>> According to a chemical compatibility chart I have, Silicone Oil
>> (DOT5) is has excellent compatibility with the following plastics:
>> Polyethylene
>> Polypropylene
>> Polysulfone
>> Polyurethane
>> And also excellent compatibility with the following elastomer: FKM or
>> more commonly known as Viton.
>>
>> I believe I used Danco brand #36 o-rings from Home Depot. These are
>> either polyethylene or polypropylene.
>>
>> I have had DOT5 in my car for over three years and no leaks or
>> problems. I had replaced all the hoses, seals, rear wheel cylinders,
>> and brake master cylinder as well as the same time.
>>
>> Cheers!
>> Michael
>>
>>
>>
>> ------------------------------------------------------------------------
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|