Thanks, Michael. Very helpful. Interesting that none of the Big Three's
catalogs
show ANY o-rings for the PDWA.
Dave
MTRsix71@aol.com wrote:
> Dave,
> According to a chemical compatibility chart I have, Silicone Oil
> (DOT5) is has excellent compatibility with the following plastics:
> Polyethylene
> Polypropylene
> Polysulfone
> Polyurethane
> And also excellent compatibility with the following elastomer: FKM or
> more commonly known as Viton.
>
> I believe I used Danco brand #36 o-rings from Home Depot. These are
> either polyethylene or polypropylene.
>
> I have had DOT5 in my car for over three years and no leaks or
> problems. I had replaced all the hoses, seals, rear wheel cylinders,
> and brake master cylinder as well as the same time.
>
> Cheers!
> Michael
>
>
>
> ------------------------------------------------------------------------
> Get trade secrets for amazing burgers. Watch "Cooking with Tyler
> Florence" on AOL Food
> <http://food.aol.com/tyler-florence?video=4?&NCID=aolfod00030000000002>.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|