Mike,
I just went through this after replacing the fuel line between the pump and
carbs with 1/4 brake line. I used two 1/4" Derlin white plastic Teflon half
ferrules back to back in place of the one long 5/16" brass ferrule. The Derlin
material is compatible with gasoline. I think that the cost was .06 cents a
piece. The Derlin half ferrules are available in the brass cabinet in the
plumbing section of the local hardware store.
Greg Perry
-----Original Message-----
>From: DaCRANEz@aol.com
>Subject: Fuel line ferrule
(stuff deleted)
>If anybody knows the fix please share with us.
>Thanks.
>Mike C '71 TR6
|