> Does anyone have a preferred cleaning agent for carbs. The carb cleaner I
purchased at NAPA doesn't do the job and they still look like they need
further cleaning on the outside. I still have some light corrosion and
discoloration that even subsequent scrubbing with Lacquer cleaner hasn't
completely cured the problem.
>
> Mike Lunsford, 1970 TR6
Mike,
Powder coating does a great job. It is a bit of effort (I'm unemployed and
plan to stay that way so time is not a problem). It will give you the best
looking crabs in town --- see
http://www.buckeyetriumphs.org/technical/Carbs/PCCarbs/PCCarbs.htm
You can also just do the bead blasting and get a clean finish as shown in
some of the photos on the link.
Nelson Riedel
Granville, Ohio
'68TR250, '76TR6, '70TR6 (project)
|