Re: [TR] VIN stamping

[Geo Hahn <ahwahneetr@gmail.com>]

On 1/27/11, cfmtr3a@verizon.net <cfmtr3a@verizon.net> wrote:
> ...Argh.  Only if I had had the brass pop rivets.  10 minutes and all would
> have been done.

I thought they were aluminum rivets.  I used pop rivets (so did
Standard Triumph on my TR4) if you're fussy you could fill the hole
with a bit of JBWeld for a more accurate look.
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums