[TR] VIN stamping

Subject:	[TR] VIN stamping
From:	ahwahneetr at gmail.com (Geo Hahn)
Date:	Thu, 27 Jan 2011 10:22:31 -0700
References:	<702241019.647502.1296142216961.JavaMail.root@vznit170074>

On 1/27/11, cfmtr3a at verizon.net <cfmtr3a at verizon.net> wrote:
> ...Argh.  Only if I had had the brass pop rivets.  10 minutes and all would
> have been done.

I thought they were aluminum rivets.  I used pop rivets (so did
Standard Triumph on my TR4) if you're fussy you could fill the hole
with a bit of JBWeld for a more accurate look.

<Prev in Thread]	Current Thread	[Next in Thread>
[TR] VIN stamping, (continued) [TR] VIN stamping, Ron Olds Re: [TR] VIN stamping, Randall [TR] VIN stamping, Randall Re: [TR] VIN stamping, Ken Gano, home PC [TR] VIN stamping, Ken Gano, home PC Re: [TR] VIN stamping, Bob Nogueira [TR] VIN stamping, Bob Nogueira Re: [TR] VIN stamping, cfmtr3a [TR] VIN stamping, cfmtr3a at verizon.net Re: [TR] VIN stamping, Geo Hahn [TR] VIN stamping, Geo Hahn <= Re: [TR] VIN stamping, Randall [TR] VIN stamping, Randall

Previous by Date:	Re: [TR] VIN stamping, Geo Hahn
Next by Date:	[TR] TR4 / 4A Commission Number Plates -- LBS or KILOS?, Geo Hahn
Previous by Thread:	Re: [TR] VIN stamping, Geo Hahn
Next by Thread:	Re: [TR] VIN stamping, Randall
Indexes:	[Date] [Thread] [Top] [All Lists]