I like this idea!!!
Sent from my Verizon Wireless BlackBerry
-----Original Message-----
From: WeslakeMonza1330@aol.com
Date: Tue, 10 May 2011 13:54:29
To: <dlh2001@comcast.net>; <an5.sprite@gmail.com>; <jessmd1@comcast.net>
Cc: <spridgets@autox.team.net>
Subject: Re: [Spridgets] brake bleeding
Or if like me you don't have a compressor you fit a bicycle valve to a
spare master cylinder cap and use a bicycle pump!
In a message dated 10/05/2011 05:03:11 GMT Daylight Time,
dlh2001@comcast.net writes:
One way to "power bleed" is to find a rubber stopper that fits tightly
over the master cylinder fill hole. You then drill a hole in the stopper
such that you can fit it to an air blow gun attachment.
Fire up the compressor and set the regulator to a few psi.
Check the master fluid level often as you proceed.
Worked for me.
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|