Bill, I just want to be sure you're turning the right fill plug.
Driver's side, half way up, just back from the bell housing.
It actually takes a while for the tranny to warm up, and it will only get up
to about 130-140 degrees. I'm not sure that's gonna make it any easier.
If you can raise the car to get better access then a long pipe slipped over
the wrench may get you the leverage you need to crack it free.
-----Original Message-----
From: spridgets-bounces@autox.team.net
Hello,
bought a long 14 mm wrench today, got under the car and banged
with a hammer on it and still can't budge the fill plug.
Someone suggested warming it with a 100 watt light bulb...
would driving the car and warming the tranny do the same thing,
seeing as how I don't have a drop light? .. or should I get one
of those too?.... (mine is a cordless LED type, no heat)... or
how about a blow dryer aimed at the plug?...
--
Best regards,
Bill L.
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|