Yes, I've heard about Hylomar before. Haven't tried it, but have
experienced it on a Porsche engine I was installing for a friend. Good
stuff, I know.
But, Derf, I'm GONNA use the Fel Pro gasket, this time ;)
Thanks.
Bud
----- Original Message -----
From: "derf" <derf247@gmail.com>
To: "Bud Osbourne" <abcoz@hky.com>
Cc: "Paul Asgeirsson" <PAsgeirsson@worldnet.att.net>; "Spridget Chat Group"
<spridgets@autox.team.net>
Sent: Wednesday, April 15, 2009 7:57 PM
Subject: Re: [Spridgets] Fel-Pro gaskets
> OK, but have you used Hylomar? It is good stuff. A little goop to
> hold the gasket to the valve cover and a little Hylomar between the
> gasket and the head and you can remove and replace the valve cover
> many times. You may have to use a little more Hylomar after 2 or 3
> removals,
> but it will seal and it won't stick the gasket to the head.
> Hylomar = Good stuff.
> You should look into it. If you don't like it, you still will know a
> little more than you did before about it.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|