spridgets
[Top] [All Lists]

Re: [Spridgets] Fel-Pro gaskets

To: Bud Osbourne <abcoz@hky.com>
Subject: Re: [Spridgets] Fel-Pro gaskets
From: derf <derf247@gmail.com>
Date: Wed, 15 Apr 2009 17:57:02 -0600
OK, but have you used Hylomar?  It is good stuff.  A little goop to
hold the gasket to the valve cover and a little Hylomar between the
gasket and the head and you can remove and replace the valve cover
many times.  You may have to use a little more Hylomar after 2 or 3
removals,
but it will seal and it won't stick the gasket to the head.
Hylomar = Good stuff.
You should look into it.  If you don't like it, you still will know a
little more than you did before about it.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>