Front Wheel Bearings Thrust Face

["Mark Endicott" <mark@nashvilletn.org>]

I am reassembling the front hubs on my Bugeye and need a confidence check on
the bearing placement.  As I recall from doing it 10 years ago the "Thrust"
marking on the bearings are like this:

The "Thrust" marking faces the center of the car on both bearings.  Outer
bearing "Thrust" side mates with the spacer and the inner bearing "Thrust"
side mates with the grease seal.  My bearings are marked so I don't have to
try to figure that out.

Please correct me if this isn't right.

Mark
Nashville