spridgets
[Top] [All Lists]

RE: Size of Crankshaft pulley bolt?

To: "'Dan Dwelley'" <maine2me@yahoo.com>, "Brad Fornal" <toyman@htcomp.net>, curt.onstott@orst.edu
Subject: RE: Size of Crankshaft pulley bolt?
Date: Thu, 27 Jan 2000 01:21:20 +0800charset=us-ascii
Cc: spridgets@autox.team.net
I had to buy a craftsman, with a 1/2" to 3/4" adapter.  Cost around $30 ($22
for socket and 8 for adapter).

And then I didn't use it.  <grin>  But at least I now have it.

Mike

> -----Original Message-----
> From: Dan Dwelley [SMTP:maine2me@yahoo.com]
> Sent: Wednesday, January 26, 2000 12:09 PM
> To:   Brad Fornal; curt.onstott@orst.edu
> Cc:   spridgets@autox.team.net
> Subject:      Re: Size of Crankshaft pulley bolt?
> 
> Feel lucky it's not the 1500. It's a pain to find a 1
> 13/16 socket at the local store...Thank god I have a
> friend that works on big trucks...!
> 
> Dan Dwelley
> 77 Midget
> Alexandria, Va.
> 
> --- Brad Fornal <toyman@htcomp.net> wrote:
> > The 1275 on the floor in the garage has a 1 5/16
> > bolt in it. YMMV
> > 
> > curt.onstott@orst.edu wrote:
> > 
> > > I pulled my engine on Saturday.  It was still
> > running on three cylinders and
> > > I took the car on one last drive beforehand.  I
> > expect it to be laid up
> > > until Summer.  Needs a full engine rebuild and a
> > Datsun tranny transplant.
> > > What size of socket do I need to get the
> > Crankshaft pulley bolt off of my
> > > 1275?  I'd rather use my impact wrench than a
> > hammer and chisel :)
> > >
> > > Curt Onstott - Crop and Soil Science Computing
> > Admin
> > >   Oregon State University. - (541) 737-5875 -
> > Office: CrpS 153b
> > >                     http://www.css.orst.edu/curt
> > > No, life IS a contest.  Perhaps it doesn't FEEL
> > like a contest to YOU
> > >                 because I WON so long ago. 
> > -Voorhis
> > >   '70 MG Midget    '75 Jaguar XJ6     '95
> > Specialized RockHopper
> > 
> > 
> > 
> > 
> Do You Yahoo!?

This message is for the named person's use only.  It may contain
confidential, proprietary or legally privileged information.  No
confidentiality or privilege is waived or lost by any mistransmission.
If you receive this message in error, please immediately delete it and all
copies of it from your system, destroy any hard copies of it and notify the
sender.  You must not, directly or indirectly, use, disclose, distribute, 
print, or copy any part of this message if you are not the intended 
recipient. CREDIT SUISSE GROUP, CREDIT SUISSE FIRST BOSTON, and each of
their subsidiaries each reserve  the right to monitor all e-mail 
communications through its networks.  Any views expressed in this message
are those of the individual sender, except where the message states 
otherwise and the sender is authorised to state them to be the views of 
any such entity.




<Prev in Thread] Current Thread [Next in Thread>