"Oil is for lubrication, water is for cooling. I don't thing one
should do the others job. Then
> again, maybe I'm wrong...."
>
Yep.
Actually some modern engines use oil to keep parts cool. The Acura
GSR engine has little spray heads that spray oil on the bottom side of the
pistons to keep them from melting. Even on our 1950's designed A-series
engines oil is used to keep the valves cool to prevent them from binding in
the guides. (that's gonna get some flames.) Oil is a good way to dissipate
heat.
> ----------
> From: Toby Atwater[SMTP:tob@taltec.net]
> Reply To: Toby Atwater
> Sent: Sunday, March 14, 1999 5:35 PM
> To: Sprite Maling List
> Subject: Re: Oil and Oil coolers
>
> >David's measurements were after the oil cooler, 160F to 195F, it would
> >not be unreasonable to expect a temp before the oil cooler of say 180F
> >to 225F? I know it depends on the number of rows, the airflow through the
> >cooler etc, but in the absence of data that is what I'd guess.
>
>
> But wait, doesn't the temp of the oil mean that your engine is running too
> hot? and
> the cooling system is the culprit? I think you shouldn't get your oil that
> hot to
> start with, maybe invest in a more efficient cooling system. Oil is for
> lubrication, water is for cooling. I don't thing one should do the others
> job. Then
> again, maybe I'm wrong....
>
> Toby
>
|