Ron,
who do you determine that there is too much flow?
Ulix
On Fri, 26 Feb 1999 Ronsoave@aol.com wrote:
> Hi Jeff,
>
> After some good discussions a while back with Pete S., I think the best way to
> go is with a vented cap. You will still have a vacuum when there is good
> manifold vacuum, and you'll have a vent path, albeit small, at low vacuum
> conditions. On my still-leak-free(!) Bugeye, I have the PCV routed from the
> timing cover with a filter on the little stub that comes off the rocker cover
> on the 1275, and the cap is sealed. FWIW, the NAPA valve previously mentioned
> provided a bit too much flow, and I had to crimp the line down.
>
> Regards,
> Ron
>
Ulix __/__,__ ___/__|\__
..............................................(_o____o_)....<_O_____O_/...
'67 Sprite '74 X1/9
|