shotimes
[Top] [All Lists]

RE: [Shotimes] Jacking

To: "'Paul L Fisher'" <sho@paul-fisher.com>,
Subject: RE: [Shotimes] Jacking
From: "Mark Mucher" <mmucher@bellsouth.net>
Date: Thu, 20 Jul 2006 16:22:16 -0400
Yup, thanks again to all.

Mark


-----Original Message-----
From: Paul L Fisher [mailto:sho@paul-fisher.com] 
Sent: Thursday, July 20, 2006 4:12 PM
To: 'Mark Mucher'; Shotimes@autox.team.net
Subject: RE: [Shotimes] Jacking

Yes, I recommended it as well, all I'm saying is that it will flex. It won't
break, it will flex, that was your question, right?


Paul L Fisher

Visit my website: http://www.paul-fisher.com Amsoil dealer:
http://www.paul-fisher.com/oil


-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Mark Mucher
Sent: Thursday, July 20, 2006 2:30 PM
To: Shotimes@autox.team.net
Subject: RE: [Shotimes] Jacking

But George doesn't have that stuff and he recommended that position too...

Mark


-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Paul L Fisher
Sent: Thursday, July 20, 2006 3:23 PM
To: 'Dave Kegel'; Shotimes@autox.team.net
Subject: RE: [Shotimes] Jacking

You have a roll cage and, I believe, sub frame connectors of course there is
no twisting. Stock cars will twist.


Paul L Fisher

Visit my website: http://www.paul-fisher.com Amsoil dealer:
http://www.paul-fisher.com/oil


-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Dave Kegel
Sent: Thursday, July 20, 2006 1:55 PM
To: Shotimes@autox.team.net
Subject: RE: [Shotimes] Jacking

Nope

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Mark Mucher
Sent: Thursday, July 20, 2006 1:51 PM
To: 'Dave Kegel'; Shotimes@autox.team.net
Subject: RE: [Shotimes] Jacking


Thanks, all!

Wouldn't there be a lot of twisting to do it that way?

Mark

-----Original Message-----
From: Dave Kegel [mailto:d.kegel@comcast.net]
Sent: Thursday, July 20, 2006 12:32 PM
To: 'Mark Mucher'; Shotimes@autox.team.net
Subject: RE: [Shotimes] Jacking

Put the floor jack under the driver's rear subframe bushing.  That will
allow you to lift the entire side of the car.

Dave

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Mark Mucher
Sent: Thursday, July 20, 2006 11:28 AM
To: Shotimes@autox.team.net
Subject: [Shotimes] Jacking


I want to jack up one side of my '90 SHO so I can rotate the tires from
front to back.

 

What's the best way?

 

Will the factory jack (on the front, I assume) lift the back too?

 

Is there somewhere I can put a floor jack to accomplish this without bending
anything underneath?

 

Thanks in advance,

 

mm in sunny FL
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.2/393 - Release Date: 7/19/2006
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.2/393 - Release Date: 7/19/2006
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes

<Prev in Thread] Current Thread [Next in Thread>