shotimes
[Top] [All Lists]

RE: [Shotimes] Jacking

To: <Shotimes@autox.team.net>
Subject: RE: [Shotimes] Jacking
From: "Dave Kegel" <d.kegel@comcast.net>
Date: Thu, 20 Jul 2006 14:30:12 -0500
Actually, I have neither.  But I suppose you're right, there's always
going to be some degree of twisting.  But like you said, it still works.

Dave

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Paul L Fisher
Sent: Thursday, July 20, 2006 2:23 PM
To: 'Dave Kegel'; Shotimes@autox.team.net
Subject: RE: [Shotimes] Jacking


You have a roll cage and, I believe, sub frame connectors of course
there is no twisting. Stock cars will twist.


Paul L Fisher

Visit my website: http://www.paul-fisher.com
Amsoil dealer: http://www.paul-fisher.com/oil


-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net]
On Behalf Of Dave Kegel
Sent: Thursday, July 20, 2006 1:55 PM
To: Shotimes@autox.team.net
Subject: RE: [Shotimes] Jacking

Nope

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Mark Mucher
Sent: Thursday, July 20, 2006 1:51 PM
To: 'Dave Kegel'; Shotimes@autox.team.net
Subject: RE: [Shotimes] Jacking


Thanks, all!

Wouldn't there be a lot of twisting to do it that way?

Mark

-----Original Message-----
From: Dave Kegel [mailto:d.kegel@comcast.net] 
Sent: Thursday, July 20, 2006 12:32 PM
To: 'Mark Mucher'; Shotimes@autox.team.net
Subject: RE: [Shotimes] Jacking

Put the floor jack under the driver's rear subframe bushing.  That will
allow you to lift the entire side of the car.

Dave

-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Mark Mucher
Sent: Thursday, July 20, 2006 11:28 AM
To: Shotimes@autox.team.net
Subject: [Shotimes] Jacking


I want to jack up one side of my '90 SHO so I can rotate the tires from
front to back.

 

What's the best way?

 

Will the factory jack (on the front, I assume) lift the back too?

 

Is there somewhere I can put a floor jack to accomplish this without
bending anything underneath?

 

Thanks in advance,

 

mm in sunny FL 
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes

-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.2/393 - Release Date:
7/19/2006
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.2/393 - Release Date:
7/19/2006 _______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes

<Prev in Thread] Current Thread [Next in Thread>