Nope
-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Mark Mucher
Sent: Thursday, July 20, 2006 1:51 PM
To: 'Dave Kegel'; Shotimes@autox.team.net
Subject: RE: [Shotimes] Jacking
Thanks, all!
Wouldn't there be a lot of twisting to do it that way?
Mark
-----Original Message-----
From: Dave Kegel [mailto:d.kegel@comcast.net]
Sent: Thursday, July 20, 2006 12:32 PM
To: 'Mark Mucher'; Shotimes@autox.team.net
Subject: RE: [Shotimes] Jacking
Put the floor jack under the driver's rear subframe bushing. That will
allow you to lift the entire side of the car.
Dave
-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of Mark Mucher
Sent: Thursday, July 20, 2006 11:28 AM
To: Shotimes@autox.team.net
Subject: [Shotimes] Jacking
I want to jack up one side of my '90 SHO so I can rotate the tires from
front to back.
What's the best way?
Will the factory jack (on the front, I assume) lift the back too?
Is there somewhere I can put a floor jack to accomplish this without
bending anything underneath?
Thanks in advance,
mm in sunny FL
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|