These are some of the things I found by doing a search for "table saw sanding
disc".
The shopsmith & Smithy come equipped with a sanding disc, although I am not sure
if they would fit a normal table saw.
http://store.yahoo.com/squaredrive/cd-0010.html
McFeely's Square Drive Screws
10'' Calibration/Sanding Disk
The teeth on a saw blade sure can be a nuisance sometimes
like
when you are trying to set the blade angle for a bevel cut.
Saw
teeth
and a bit of pitch buildup can make set-up a real guessing
game.
Make things easier on yourself with Freuds combination
Calibration /
Sanding disk. Its precision ground plate is an extra stiff
5/32
inches
thick (thats 50% thicker than most saw blades!), and the
plate
doesnt
have any teeth or gullets to get in the way of a machinists
square, so
the full diameter is available for reference. Once the saw is
properly
aligned, apply a pressure sensitive adhesive backed sanding
disk and
turn your saw into a precision disk sander. See our abrasives
section
for both 8" and 10" disks to fit. 5/8" arbor hole.
CD-0010$37.95
-----------
http://www.homearts.com/pm/shoptalk/02toolb2.htm
Freud's calibration and sanding disc is designed to
improve the accuracy of your table saw while making it
more versatile. The disc is a 5/32"-thick steel plate that
is precisely ground out of high-strength steel. Its surface
is said to be flat to within .001". Install it in place of
your table saw blade and use it to gauge the distance to
the fence or miter gauge. This allows for extremely
accurate setup. You can augment its versatility by
attaching the company's peel-and-stick abrasive discs
to it, allowing you to use your table saw as a sander. It
comes in diameters of 8" and 10" ($35 and $38), and a
5-disc sanding pack costs from $14 to $24 at Freud
tool dealers and through tool catalogs. Write Freud,
P.O. Box 7187, 218 Feld Avenue, High Point, NC
27264; (910) 434-3171.
-------------
*** optional sanding disc***
http://store.yahoo.com/transquip-au/ryhbt250.html
Ryobi 10inch/254mm Combination Home Workshop Table Saw
Perfect for the home woodworker. With a 1500 watt motor,
full length side fence,
safety lock-off switch and thermal overload button. By
fitting the optional sanding disc
and power tool attachment kits, this unit becomes a
complete woodworking system,
for routing, sanding shape cutting and finishing. If you
purchase this tool with any of
our Routers, we will send you the attachment kit
corresponding the router for free
RYHBT250AUD$345.00
-----------------
INSTRUCTIONS FOR USING RIDGID
SANDING DISC MODEL AC2040
For use on: RIDGID 10 Inch Table Saw - Models TS2412, TS2400 and TS2424
For use on: RIDGID 10 Inch Radial Saw - Model RS1000
http://www.ridgidparts.com/pdf/AC2040.pdf
--------------
Good Luck
Brian
///
/// shop-talk@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe shop-talk
///
///
|