mg-mmm
[Top] [All Lists]

PA/PB BLOCKS

To: <mg-mmm@autox.team.net>
Subject: PA/PB BLOCKS
From: "John James" <jj@octagon.fsbusiness.co.uk>
Date: Thu, 14 Nov 2002 21:08:59 -0000
Reply-to: "John James" <jj@octagon.fsbusiness.co.uk>
Sender: owner-mg-mmm@autox.team.net
I don't profess to be an expert on the subject, but I have always understood
that the safe limit for reboring on these engines was +60 'thou. If that is
the case, +60 'thou on a 57mm bore with 83mm stroke would give 892cc, still
well short of the PB's 939cc.

Seems to me that to bore another 20 'thou on Dennis' already well over-bored
57mm block is tempting providence.

JOHN JAMES

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/cgi-bin/majorcool
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-mmm
///  Send list postings to mg-mmm@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>
  • PA/PB BLOCKS, John James <=