>Date: Mon, 13 Mar 2000 04:23:33 -0700 (MST)
>X-PH: V4.1@router2.mail.cornell.edu (Cornell Modified)
>From: owner-mg-mmm@autox.team.net
>To: owner-mg-mmm@autox.team.net
>Subject: BOUNCE mg-mmm@Autox.Team.Net: Non-member submission from [Dr G
>W Owen <ensgwo@bath.ac.uk>]
>
>Date: Mon, 13 Mar 2000 11:21:40 +0000 (GMT)
>From: Dr G W Owen <ensgwo@bath.ac.uk>
>To: rob thomas <rob@thomasr.greatxscape.net>
>cc: British-Cars-Pre-War@autox.team.net, mg-mmm@autox.team.net
>Subject: Re: Bakelite/Bluemels wheel
>
>
>I used Araldite (epoxy) to repair a wheel years ago with great sucess. THE
>TRICK IS TO MIX POWDER PAINT IN THE EPOXY. Black is very easy to do
>
>Geraint Owen
>
>On Mon, 13 Mar 2000, rob thomas wrote:
>
> > Is there anything to worry about when repairing the crack in a Bluemels
> MGPA
> > wheel. I bought one at an autojumble for £25 but one of the spokes has
> > caused a piece to chip off the rim. Its only small but the pattern of
> > colours is going to be difficult to match. Should I use epoxy resin and
> > then paint it? What paint would be best?
> > TIA
> >
> > Rob Thomas
> > Wales
> >
> >
|