Joe,
What is the engine number on the block. My TR3 and 4 blocks use bolts to retain
the cam bearings.
Brad Eells
Sent from my iPhone
> On Nov 30, 2018, at 11:26 AM, Joe Alexander via Fot <fot@autox.team.net>
> wrote:
>
> Kas and All.
>
> Sean was stripping a block and noticed that there were no Cam Bearing
> Retainer Hardware. And the center web bridged the width of the block and was
> machined.
>>
>> TS1362E
>
> Clearly, running design changes for a reason. Any insights on this?
>
> <image1.jpeg>
>
>
> <image2.jpeg>
>
>>
>> Joe Alexander
>> 4505 Donald Dr
>> Cedar Falls, IA 50613
>> The-vintage-racer.com
>> Gasketinnovations.com
>> Cell: 319.464.4711
>>
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/tr4abrad@gmail.com
>
>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/pipermail/fot
|