Nathan,
Also check to make sure that the crossover tube does not interfere with
the stock wheel. The right side crossover tube I purchased from the
local Nissan dealer would fit properly, but it interfered with the
wheel. The correct tube for the roadster must cross from the outside to
the inside at the top beyond the end of the caliper in the area where
the rotor is exposed. If the tube bends around the caliper body, it
will interfere with the stock wheel.
Rick Chianese
SRL311-14035
Orlando, FL - 85F ptly cldy
Ken Pearce @SMTP@Exchange wrote:
>
> Check and make sure the short line (with the platic coating that connects
> the outside piston to the inside one) is not upside down. I made the same
> mistake on my last week and then I noticed the fittings on the short line
> have different length threads, one longer one shorter...
>
> I'm by no means an expert, but thought I'd give my $.02
>
|