ba-autox
[Top] [All Lists]

RE: CV joints?

To: <mrclem@telocity.com>, "Autocross" <ba-autox@autox.team.net>
Subject: RE: CV joints?
From: "Vitaly Iourtchenko" <vitaly@nuance.com>
Date: Tue, 25 Sep 2001 10:15:47 -0700
I beg to differ. One axle on my del Sol takes about 30 minutes
to remove, and that includes jacking up the car.

You can get a full axle from www.raxles.com for pretty cheap.
And it will have brand new joints, unlike the rebuilt stuff
you buy at a parts store. So if you swap the whole axle, it's
pretty trivial. Changing a CV joint is not too complicated
either. Some DSM instructions here:
http://www.vfaq.com/mods/CVboots.html

You don't have to separate the lower ball joint on a 5th gen
Civic to remove the axle (I don't know what you have). If you
*do* want to separate the balljoint, a hammer is all it takes.
Really.

So I guess you need a meaty breaker bar, 32mm socket (what year?)
and 5-6 feet of pipe to loosen the axle nut, and a big hammer. Snap
ring pliers and CV clamp pliers if you change the CV joint.

You can buy lots of beer with the money you save,
Vitaly



-----Original Message-----
From: Michael R. Clements [mailto:mrclem@telocity.com]
Sent: Tuesday, September 25, 2001 9:34 AM
To: mrclem@telocity.com; Autocross
Subject: RE: CV joints?


Thanks guys for the advice. "really messy and uncomfortable and hard
work"
doesn't sound like the kind of thing that I want to do myself.

This would be the first time I've ever sent this car to a mechanic. Any
advice
where to take the car -- recommended Honda mechanics or service shops in
the
Redwood City area?

Thanks again,

-----Original Message-----
From: owner-ba-autox@autox.team.net
[mailto:owner-ba-autox@autox.team.net]On Behalf Of Michael R. Clements
Sent: Tuesday, September 25, 2001 07:36
To: Autocross
Subject: CV joints?


My old Honda Civic is making popping or cracking sounds when I give it
gas
when the steering wheel is turned. I suspect this is the CV joints
starting to
go bad.

I'm wondering if anyone can tell me whether this sounds like a
reasonable
diagnosis, and if so, how hard it is to replace the CV joints. Is it a
few
hours, a full day, or a weekend job? Does it require special tools and
dexterous hands that can fit into tiny spaces, or is it pretty normal
stuff?

Thanks,

Michael R. Clements
mrclem@telocity.com
Some find truth in beauty, others find beauty in truth.

<Prev in Thread] Current Thread [Next in Thread>