I spoke with a front end guy today to ask about him putting in new coil springs. He said that he thought the car had a mustang like front end. True? Also, while I was working on the antenna, the litt
<< I spoke with a front end guy today to ask about him putting in new coil springs. He said that he thought the car had a mustang like front end. True? >> Kim, NOT TRUE!!!! These cars are basically j
Yes, it is Mustang like, in that they both use a spring tower design. Whether or not any parts are interchangeable, I don't know. With so many parts of different brands being sourced from the same ve
I used the 3M Windo-Weld. It physically holds the glass in fine, but didn't completely keep out water in a heavy rain. A bead of clear silicone fixed that problem. Scott Isensee
Both of mine leaked from the day one, so I removed/reinstalled them in June '76. They have withstood tornado winds, rain and Florida gully washers. If only the rest of the car was as waterproof.....:
I picked up a set of shocks at a Mustang speciality shop for #301 a few months ago, based on the parts cross-reference on John Blair's web site. Haven't put them in yet, but they look like the right
I can tell you from experience while the Brick is Mustang like NONE of the parts are interchangable. The fellow across the street had a friend with a Mustang. We replaced his front end and commented
The Mustang was one of the original bodys, 64 1/2 - 67? Sorry Greg, I'll have to plead ignorance. I don't remember the question. What primer? I've been running about 100 pieces of email a day. It's s
-- Yeah, they are somwhat different. The '69, '70 Boss's were different and I'm curious how they compare to the Bricklin. -- -- There was a "paint" page on the web site (it seems to have disappeared
I need all and any current specs and part numbers for Bricklin parts! ASAP the front end is Chrystler and I have the current specs for arms struts bushings etc... THanx KTT
<< I need all and any current specs and part numbers for Bricklin parts! ASAP the front end is Chrystler and I have the current specs for arms struts bushings etc... WHAT?! The front end is NOT Chrys