- 1. Re: Techinal Help Needed (score: 1)
- Author: Maycinc@cs.com
- Date: Mon, 6 Feb 2006 21:54:17 EST
-
- /html/bricklin/2006-02/msg00022.html (7,356 bytes)
- 2. Re: air latch vs electric door solenoid (score: 1)
- Author: Maycinc@cs.com
- Date: Tue, 7 Feb 2006 22:38:57 EST
- One problem with the air latches is that they stay open with very little air pressure. You have to install solenoids that let the air out when you release the switch. If you don't then the latch will
- /html/bricklin/2006-02/msg00030.html (8,237 bytes)
- 3. Re: air latch vs electric door solenoid (score: 1)
- Author: Maycinc@cs.com
- Date: Fri, 10 Feb 2006 22:35:38 EST
- When I first installed the air latches (from Terry) the doors would only latch on the 1st catch. I called Terry and he said that it was because there is pressure in the line unitl the door is all th
- /html/bricklin/2006-02/msg00039.html (9,250 bytes)
- 4. No Heater - Fixed (score: 1)
- Author: Maycinc@cs.com
- Date: Sun, 12 Feb 2006 00:47:42 EST
- Naturally I haven't driven ol 1343 much this winter. Part of the reason was the heater didn't work. I finally decided to figure out what the problem was. The heater valve is normally open and the vac
- /html/bricklin/2006-02/msg00044.html (7,230 bytes)
- 5. AZ Junkyard Closing (score: 1)
- Author: Maycinc@cs.com
- Date: Mon, 13 Feb 2006 14:56:52 -0500
- Got this from the Toronado club and thought it might be interesting to B owners as well. Marvin The largest vintage junkyard in Arizona has been sold to developers and is being crushed. The owners mo
- /html/bricklin/2006-02/msg00049.html (6,873 bytes)
- 6. Recovering the Steering Wheel (score: 1)
- Author: Maycinc@cs.com
- Date: Fri, 23 Sep 2005 21:38:14 EDT
- For anyone needing their steering wheel recovered I found a place that looks interesting. The web site is www.american-stitches.com, phone is 888-403-3403. They specialize in recovering steering whee
- /html/bricklin/2005-09/msg00045.html (6,435 bytes)
- 7. Re: power steering pump (score: 1)
- Author: Maycinc@cs.com
- Date: Sat, 9 Jul 2005 21:49:59 EDT
- According to my records, the pump is NAPA 206049 rear mount. 58-65 T-bird, 58-60 Lincoln, 58-80 Ford Trucks. Marvin
- /html/bricklin/2005-07/msg00014.html (7,148 bytes)
- 8. Re: Heater box alignment (score: 1)
- Author: Maycinc@cs.com
- Date: Sun, 1 May 2005 23:22:23 EDT
- I did the same thing. I couldn't get Terry's brackets to work and I didn't like the misalignment of the defroster. I think the fabricated ducting is a better way to go. Marvin
- /html/bricklin/2005-05/msg00005.html (7,159 bytes)
- 9. Additional fuse block (score: 1)
- Author: Maycinc@cs.com
- Date: Sun, 1 May 2005 23:27:06 EDT
- Has anyone added a 2nd fuse block to their Bricklin? If so, how is it connected? The original fuse block doesn't have enough switched accessory connections. Right now, I'm have the electric fan and t
- /html/bricklin/2005-05/msg00006.html (6,503 bytes)
- 10. '75 Carburetor (score: 1)
- Author: Maycinc@cs.com
- Date: Mon, 16 May 2005 09:49:52 -0400
- Well ol' 1343 failed the emissions test with very high HC and CO. Took it to a carb specialist and they said I need a new carb. It's running too rich but they couldn't lean it out enough without the
- /html/bricklin/2005-05/msg00038.html (7,160 bytes)
- 11. RE: 75 carburetor (score: 1)
- Author: Maycinc@cs.com
- Date: Tue, 17 May 2005 13:16:12 -0400
- What was confusing was the carb does not have 2300 on it anywhere. The numbers on the air horn are 4412-1 and 2878. It also has 3250 stamped on the top next to the air cleaner stud. But from looking
- /html/bricklin/2005-05/msg00046.html (6,913 bytes)
- 12. Re: Where to Purchase Pop Rivets (score: 1)
- Author: Maycinc@cs.com
- Date: Tue, 8 Feb 2005 21:26:40 EST
- I assume you mean the ones with the big heads. They also hold the rubber inner fenders on. You might try a place that specializes in fasteners. However, I found mine at Pep Boys. Marvin
- /html/bricklin/2005-02/msg00033.html (7,136 bytes)
- 13. Re: door systems (score: 1)
- Author: Maycinc@cs.com
- Date: Tue, 8 Feb 2005 21:30:15 EST
- The DeLorean doors are actually held up by torsion bars that are similar (but larger) to the trunk lid bars on older cars. The cylinders are only there as an assist. Marvin
- /html/bricklin/2005-02/msg00034.html (7,371 bytes)
- 14. Re: Mufflers (score: 1)
- Author: Maycinc@cs.com
- Date: Wed, 16 Feb 2005 00:33:31 EST
- A Walker 02481 for a '74 Camaro is an exact replacement for the original. I got mine about 4 years ago from Napa for $185. It has 2in intakes and 2 1/4 outlets. The sound is just about right for me,
- /html/bricklin/2005-02/msg00061.html (7,061 bytes)
- 15. Re: Malcolm Bricklin in the news again! (score: 1)
- Author: Maycinc@cs.com
- Date: Mon, 3 Jan 2005 11:35:29 EST
- It looks like old Malcolm might be in the middle of another controversy again. GM is suing Chery for copying a Daewoo model. However, I don't know what GM is worried about since Daewoo couldn't sell
- /html/bricklin/2005-01/msg00005.html (6,950 bytes)
- 16. Chery Automobile (score: 1)
- Author: Maycinc@cs.com
- Date: Fri, 14 Jan 2005 21:02:41 EST
- The latest issue of Time magazine has an article about small cars. One of the cars mentioned is the Chery that Malcolm is trying to bring to the US. Marvin
- /html/bricklin/2005-01/msg00034.html (6,154 bytes)
- 17. Re: Rear hatch hydraulic (score: 1)
- Author: Maycinc@cs.com
- Date: Thu, 2 Dec 2004 21:53:58 EST
- I got mine from Napa. Here's a copy of an e-mail I sent to the list last year: I found a replacement for the rear hatch lift struts. I measured my one good one and here are the specs: compressed len
- /html/bricklin/2004-12/msg00003.html (7,381 bytes)
- 18. Re: water pump (score: 1)
- Author: Maycinc@cs.com
- Date: Tue, 21 Dec 2004 10:42:08 EST
- Terry Tanner recommends a Flow Kooler high flow water pump. I got mine from Summit Racing. Seems to work well. Marvin
- /html/bricklin/2004-12/msg00047.html (6,622 bytes)
- 19. Re: water pump (score: 1)
- Author: Maycinc@cs.com
- Date: Wed, 22 Dec 2004 20:01:39 EST
- Temps dropped about 10 degrees with the Flow Kooler. I still had cooling problems so I did other things (electric fan, compound scoop, etc) but it turned out that my overheating was due to faulty va
- /html/bricklin/2004-12/msg00056.html (7,209 bytes)
- 20. Re: 75 Dipstick Tube (score: 1)
- Author: Maycinc@cs.com
- Date: Mon, 8 Nov 2004 00:54:45 EST
- I'm not sure but I may have an extra dipstick tube if you need it. I'll have to dig through the shed. Marvin
- /html/bricklin/2004-11/msg00007.html (6,140 bytes)
This search system is powered by
Namazu