Was the flak blanket draped over the tranny and attached to the floor on
each side or completely wrapped around the tranny? Don
----- Original Message -----
From: "Brett Johnson" <356drb@indy.net>
> >
> > Something I'd like to know about this situation is whether Dick had any
> > kind of a scatter shield and what thickness. I've got one, but I'm
> > thinking it may be too thin at 1/8" of steel. I was already
> > contemplating doubling it...
> >
> David,
>
> The car had a flak blanket, but the steel transmission tunnel was torn
from
> the floor on both sides. On the left side there were pieces of bell
> housing, while on the right side, the pressure plate cover, some disc
> fragments and springs accompanied the bell housing fragments. The blanket
> was helpful but needed better attachment to the floor to be effective.
>
> BTW Dick was released from the hospital this morning and is home on the
> couch with his pipe and his dog, Gus.
>
> Brett Johnson
///
/// vintage-race@autox.team.net mailing list
/// or go to http://www.team.net/cgi-bin/majorcool
///
|