Hi Dr John
I read the trunnion explanation and if I read it correctly then the logic to
swap them is incorrect. With the right trunnion on the right and you make a
right hand turn the uppright on the right side screws into the trunnion
lowering the right side of the chassis and raising the left side as it
unscrews ever so slightly. Am I missing something here?
PS do you have any dimmensions for the rear axel squash tubes?
Dr John Upham wrote:
> Rolf et al,
> The explanation for trunnion side swapping is at
>
> http://www.rdg.ac.uk/~kcsupham/vixen/swapped.html
>
> A handbook for the Vixen/Tuscan range is being developed by Colin
> Ward
> and myself at
>
> http://www.rdg.ac.uk/~kcsupham/vixen/swapped.html
>
> although it is far from complete. If anyone else wishes to contribute
> then simply drop me a line.
>
> Regards,
>
> John Upham
|