Thanks,
They are aluminum. Good suggestions. Now to know the exact size of the hole?
Jim
> On Oct 4, 2020, at 4:52 PM, Rye Livingston <ryel@mac.com> wrote:
>
> I forget, steel or aluminum? If steel you could weld a washer in place.
> If aluminum, take it to a welder who is versed in welding aluminum and have
> it welded over and drill a new hole?
>
> Rye
>
>> On Oct 4, 2020, at 1:42 PM, Jim Henningsen <trguy75@gmail.com> wrote:
>>
>> List:
>> I decided to take a break on my TR6 engine bay reinstall and work on the 67
>> TR4A IRS. After dissembling the drivers side rear suspension, I noticed the
>> hole in the rear of the arm for the shock link is wallowed out. What's the
>> correct diameter of the hole? I don't have a spare trailing arm to check
>> and any ideas on creative solution to fix it?
>>
>>
>>
>> Thanks,
>> Jim Henningsen
>> Ocala, FL
>> 61 TR3A
>> 62 TR4
>> 67 TR4A
>> 75 TR6
>> 81 TR8
>> <IMG_6154.JPG>** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/ryel@mac.com
>
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|