I forget, steel or aluminum? If steel you could weld a washer in place. If
aluminum, take it to a welder who is versed in welding aluminum and have it
welded over and drill a new hole?
Rye
> On Oct 4, 2020, at 1:42 PM, Jim Henningsen <trguy75@gmail.com> wrote:
>
> List:
> I decided to take a break on my TR6 engine bay reinstall and work on the 67
> TR4A IRS. After dissembling the drivers side rear suspension, I noticed the
> hole in the rear of the arm for the shock link is wallowed out. What's the
> correct diameter of the hole? I don't have a spare trailing arm to check
> and any ideas on creative solution to fix it?
>
>
>
> Thanks,
> Jim Henningsen
> Ocala, FL
> 61 TR3A
> 62 TR4
> 67 TR4A
> 75 TR6
> 81 TR8
> <IMG_6154.JPG>** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ryel@mac.com
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|