You can / I have on a TR3 so I imagine it'll be identical for the TR4. As I
remember the front were press in and the rear screw in - but don't hold me
to that!
Andrew Uprichard
Jackson, Michigan
-----Original Message-----
From: Triumphs <triumphs-bounces@autox.team.net> On Behalf Of Jim Henningsen
Sent: Tuesday, September 1, 2020 11:37 AM
To: 'Triumphs' <triumphs@autox.team.net>
Subject: [TR] Wheel Stud Question
Can you replace the shorter wire wheel studs with the longer standard wheel
studs on the front and rear without having to separate the hubs? I haven't
done this in a long time and curious if you can switch these outs easily on
a 67 TR4A IRS.
Thanks,
Jim Henningsen
Ocala, FL
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|