Thatâ??s my favorite. Jim Henningsen
Sent from my iPhone
> On Sep 2, 2019, at 8:04 PM, Tom Walling <pdqtr6@comcast.net> wrote:
>
> I am amazed that this thread has gone this far without anyone mentioning "The
> Rope Trick"!
>
> Stuff a length of rope into one of the cylinders (one near the bottom of its
> rotation) until the cylinder is full of rope. Then use the starter motor to
> break the head gasket seal and lift the head off the block. No need for
> cranes, pulleys, explosives, or a Sky-hook.
>
>
>> On September 2, 2019 at 12:20 PM "Wbeech@flash.net" <wbeech@flash.net> wrote:
>>
>>
>> Paul,
>> That sounds more like the instructions for engine removal, not just the
>> head. You pull straight up to remove the head so as not to bind on the
>> studs.
>> Bill B
>>
>> Sent from my IBM 8088
>>
>> On Sep 2, 2019, at 10:51 AM, Paul Dorsey <dorpaul1@gmail.com> wrote:
>>
>> why does the online manual tend to say the engine needs to be kinda tilting
>> backwards?
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
>>
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/pdqtr6@comcast.net
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/trguy75@gmail.com
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|