Re: [TR] making the mating surface of an oil pan flat

[Chris Simo <ccsimonsen@gmail.com>]

--===============6778106591346614967==

--0000000000005725b6057ff9ec2f

i used a hammer, drift and steel block as an anvil.  i have a nice round
drift the size of the washer and hammer on that.

Sent from my TRASH-80

On Mon, Jan 21, 2019, 2:07 AM Sujit Roy <triumphstag@gmail.com wrote:

>   The PO put gallons of sealer around the pan/ sump and over tightened all
> the bolts. They are all raises and .if  I put a flat rule between holes, I
> can notice at least 1 or more mm gap.
>
> I am thinking of using a nut and bolt with a few washers to hopefully make
> the bolts holes flat again. Are there any other good simpler ways to do
> this. I don't want to hammer them as I think I will do more damage.
>
> Sujit
>
> --
> Sujit Roy
> Cupertino, California
>
> https://triumphstagblog.wordpress.com/
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ccsimonsen@gmail.com
>

--0000000000005725b6057ff9ec2f
Content-Transfer-Encoding: quoted-printable

<div dir=3D"auto">i used a hammer, drift and steel block as an anvil.=C2=A0=
 i have a nice round drift the size of the washer and hammer on that.<br><b=
r><div data-smartmail=3D"gmail_signature">Sent from my TRASH-80</div></div>=
<br><div class=3D"gmail_quote"><div dir=3D"ltr">On Mon, Jan 21, 2019, 2:07 =
AM Sujit Roy &lt;<a href=3D"mailto:triumphstag@gmail.com";>triumphstag@gmail=
.com</a> wrote:<br></div><blockquote class=3D"gmail_quote" style=3D"margin:=
0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir=3D"ltr">=
=C2=A0 The PO put gallons of sealer around the pan/ sump and over tightened=
 all the bolts. They are all raises and .if=C2=A0 I put a flat rule between=
 holes, I=C2=A0 can notice at least 1 or more mm gap.<br><br>I am thinking =
of using a nut and bolt with a few washers to hopefully make the bolts hole=
s flat again. Are there any other good simpler ways to do this. I don&#39;t=
 want to hammer them as I think I will do more damage.<br><br>Sujit=C2=A0=
=C2=A0<br clear=3D"all"><div><br></div>-- <br><div dir=3D"ltr" class=3D"m_2=
282625549956160203gmail_signature" data-smartmail=3D"gmail_signature"><div =
dir=3D"ltr"><div>Sujit Roy<br>Cupertino, California</div><div><br><a href=
=3D"https://triumphstagblog.wordpress.com/"; target=3D"_blank" rel=3D"norefe=
rrer">https://triumphstagblog.wordpress.com/</a><br><br></div></div></div><=
/div>
** <a href=3D"mailto:triumphs@autox.team.net"; target=3D"_blank" rel=3D"nore=
ferrer">triumphs@autox.team.net</a> **<br>
<br>
errer" target=3D"_blank">http://www.team.net/donate.html</a><br>
Archive: <a href=3D"http://www.team.net/pipermail/triumphs"; rel=3D"noreferr=
er noreferrer" target=3D"_blank">http://www.team.net/pipermail/triumphs</a>=
=C2=A0 <a href=3D"http://www.team.net/archive"; rel=3D"noreferrer noreferrer=
" target=3D"_blank">http://www.team.net/archive</a><br>
<br>
hs/ccsimonsen@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">ht=
tp://autox.team.net/mailman/options/triumphs/ccsimonsen@gmail.com</a><br>
</blockquote></div>

--0000000000005725b6057ff9ec2f--

--===============6778106591346614967==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

** triumphs@autox.team.net **

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive


--===============6778106591346614967==--