triumphs
[Top] [All Lists]

[Fot] Clutches

Subject: [Fot] Clutches
From: paulricco at att.net (Paul Ricco)
Date: Fri, 13 Jul 2018 14:17:09 -0500
References: <7DCD4154-4948-4C11-B1E1-E1F950B669E5@me.com> <CAMmo4o-a8YujkQmhaha8S8dRAeNip7Oi1eYLtLA3qx9iA8=+bg@mail.gmail.com> <1AB5F3F1-B87C-43B0-8CF7-9612E78C463F@me.com> <CAMmo4o9gFmAXZhg59st8wrLztOWM7+3AtKXWVkdg2zOFCNz1Fg@mail.gmail.com> <0496554C-A7C3-41B4-B9F4-EDB9A482376A@aol.com> <8da52686-a198-73b5-4872-50957d208cfc@tonydrews.com>
FOT,

I am not stumping for anyone and I have no firm position in this thread. I just 
want to throw out there that we have had an excellent experience with SPEC and 
the clutches that they have delivered to us. We did a tranny swap after two 
seasons in a clutch so I took the pressure plate off to inspect everything. The 
friction surface on the paddles had less than 50% wear on them. Everything had 
worn very evenly and was in excellent shape. 

Our learning curve was getting our hydraulic system to handle the load that the 
heavily sprung pressure plate required.  We did accomplish that with a few 
changes and all has been good for over two seasons. Spec?s quality of 
components and  customer service have been great for us. Their turn around time 
is also very impressive. We got our most recent clutch disc within 3 days of 
ordering and it was custom made for us. 

Best wishes to all in finding a solution that they are happy with. We certainly 
found ours and it has made our lives easier.  

Paul Ricco

Sent from my iPhone

> On Jul 12, 2018, at 5:14 PM, Tony Drews via Fot <fot at autox.team.net> wrote:
> 
> Interesting.  My setup is from clutchnet, but "responsive" is not the term 
> I'd have used.  Knowledgeable, yes.  I was happy with the product but not the 
> service.  Maybe it was just that one transaction though.
> 
> - Tony Drews
> 
>> On 7/12/2018 2:22 PM, Phil Gott via Fot wrote:
>> I?ve recently dealt with California Clutch, aka Clutchnet. Very 
>> knowledgeable. They made a custom clutch disc for me and uprated my stock 
>> TR6 pressure plate. Very responsive. 
>> Californiaclutch.com
>> ?+1 (626) 448-7432?
>> Phil Gott
>> TR4A
>> 
>> Sent from my iPhone
>> 
>> On Jul 12, 2018, at 12:43 PM, Jason Sukey via Fot <fot at autox.team.net> 
>> wrote:
>> 
>>> I purchased mine from Richard Good.  I don't have close ratios, so it's the 
>>> standard TR6 spline.  I would guess he can get them in the other spline 
>>> count also.
>>> Jason
>>> 
>>>> On Thu, Jul 12, 2018, 12:38 PM Scott Janzen <sjanzen at me.com> wrote:
>>>> I have not - where do I source?
>>>> 
>>>> On Jul 12, 2018, at 12:25 PM, Jason Sukey <jsukey at gmail.com> wrote:
>>>> 
>>>> Scott, 
>>>> Have you tried the AP racing clutch disc (stock size)? Very smooth 
>>>> engagement, claimed increase in torque capacity over stock disc.
>>>> 
>>>> Jason
>>>> 
>>>> 
>>>>> On Thu, Jul 12, 2018, 12:13 PM Scott Janzen via Fot <fot at 
>>>>> autox.team.net> wrote:
>>>>> I?ve apparently reached beyond the limits of a stock pressure plate and a 
>>>>> traditional/organic material clutch disc.  I was getting unacceptable 
>>>>> clutch slip at the Kastner Cup initially on the 3-4 and then on the 2-3 
>>>>> shifts, to the point I could not apply full power.  It?s not oil, just 
>>>>> heat and power, as the clutch disc has only a few events on it.  I?ve got 
>>>>> over 180 hp at the crankshaft.
>>>>> 
>>>>> What sources have you all found for uprated components?  I?m willing to 
>>>>> change flywheels.  Should I consider a small diameter, solid 
>>>>> center/multi-disc racing clutch?  With the close ratio gears and welded 
>>>>> diff, I need to do a fair amount of clutch slip around the paddock, and 
>>>>> am also concerned about how the on-off nature of one these might further 
>>>>> stress the differential.
>>>>> 
>>>>> Scott Janzen
>>>>> GT6
>>>>> _______________________________________________
>>>>> fot at autox.team.net
>>>>> 
>>>>> http://www.fot-racing.com
>>>>> 
>>>>> Donate: http://www.team.net/donate.html
>>>>> Archive: http://www.team.net/pipermail/fot
>>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jsukey at 
>>>>> gmail.com
>>>>> 
>>>>> 
>>>> 
>>> _______________________________________________
>>> fot at autox.team.net
>>> 
>>> http://www.fot-racing.com
>>> 
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/pipermail/fot
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing at 
>>> aol.com
>>> 
>>> 
>> 
>> 
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/fot
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at 
>> tonydrews.com
>> 
>> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/paulricco at 
> att.net
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180713/16d3ec6f/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>