A little reading reveals that it's oil mass flow rate (volume) that's
the important issue and not necessarily pressure; otherwise, splash lube
wouldn't work. The oil pressure gauge is a simple and easy way to gauge
volume. Oil pressure should increase with rpm, and several sources site
the 10 psi per 1000 rpm rule. I've also seen 2 psi per 100 rpm. Along
with supplying oil to the journals so that hydrodynamic lubrication can
occur sufficient mass flow rate is needed to cool the bearing journals.
If the pump is constant volume, as it is in our TR's, then the pump
needs to be sized to provide needed volume at low rpm but given this it
probably provides more than what's needed at high rpms; hence, the
relief valve which bleeds off pressure but also sucks power and produces
heat. Using a smaller pump or a variable volume pump could save
horsepower., but I'm not going there! LOL!
David Brady
'68 TR250
CD8124L
On 9/21/2015 8:32 PM, Jeff Scarbrough wrote:
>
>
> On Mon, Sep 21, 2015 at 7:18 PM, Chris Kantarjiev <cak@dimebank.com
>
> One of the famous Mark Donohue "Unfair Advantage" stories is about
> looking for extra power from a flat-12 Ferrari racing engine,
> maybe this is the Sunoco 512. One of the things they found when
> they were looking for extra horsepower was that the oil pressure
> was very high - I'm remembering 100 psi - and that turning it down
> got them significant horsepower.
>
> It's from there, and from Carroll Smith, that I have the rule of
> thumb that 10psi/1000rpm is *plenty* of oil pressure; much more
> than that is just wasting power.
>
>
>
> I'm no Mark Donohue, but I suspect that somewhat higher oil pressure
> may lead to somewhat longer engine life.
>
> Jeff Scarbrough
> Corrosion Acres, Ga.
>
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/dmb993@earthlink.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|