Sorry, this is the first site I saw when I googled it:
http://tr6.danielsonfamily.org/BlindMoose.htm
I didn't read all the text.
Herman's kit, like the one I linked to, is the way to go if you want to
go tube conversion.
Dave
-----Original Message-----
From: Randall <tr3driver@ca.rr.com>
To: triumphs <triumphs@autox.team.net>
Sent: Wed, Jul 9, 2014 1:12 pm
Subject: Re: [TR] TR6 Rear Shock Conversion
---- Dave <dave1massey@cs.com> wrote:
> Run, don't walk, away from this conversion. This puts the shock
> loading onto the inner wheel well which was not designed for this
> loading.
I believe you are thinking of a different conversion. The "Blind
Moose"
conversion is the one that Herman van den Akker designed and installed
on his
own TR250. It only attaches to the original shock mount.
http://www.blindmoosefab.com/rear_shock.htm
BTW, the original shock mount wasn't really designed for the load that
a tube
shock puts on it either. I've heard many reports of it breaking. So
some
reinforcement is probably a good idea.
Randall
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|