I use Copper Sealant - either "coppa seal" spray or "copper coat gasket
compound" brush on by K&W - I have never blown a TR3/4 head gasket and have
put heads on 5 of them.
Jonas Payne
PBR Consulting Services, LLC
702.882.6711
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of James Henningsen
Sent: Friday, November 15, 2013 7:15 AM
To: triumphs@autox.team.net
Subject: [TR] Head Question
Ok, this is probably a dumb question, but better safe than sorry. Do you
use any gasket sealant when installing a new copper head gasket on a TR4
motor?
Thanks,
Jim Henningsen
Ocala FL
62 TR4
75 TR6
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/jpaynepbr@cox.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|